Bird Box – Hole Diameter 28 mm - Basic Design

Bird Box – Hole Diameter 28 mm - Basic Design


New product

381 Kč

More info

Birdhouses are manufactured in many different designs. It is truly important for us to provide birds with a secure home. Construction of each individual birdhouse is based on our considerable experience. We always meet the standards and recommendations set by Czech Society of Ornithology, member of BirdLife International.

We drew inspiration from current German literature on ornithology which helped us to carry out several technical improvements. Final construction was compared witha check list of The Cornell Lab of Ornithology from Cornell University in the USA. Therefore, we can ensure that we manufacture one of the best birdhouses in terms of their construction in the market.

Basic design has following characteristics:             

  • wood is not chemically treated (coating provided in Standard and Premium designs)
  • entry hole is not protected by stainless metal sheet (possible to order)
  • the roof is made ofsolid wood, no roofing used (possible to order)


  • entrance hole 28 mm
  • solid wood in 20mm thickness, not chemically treated to ensure the animal a healthy life (no adhesives or binders)
  • high quality German galvanized construction screws help to increase the lifespan of a birdhouse and secure solidity of joints
  • sloping roof enabling proper and faster water drainage
  • embedded bottom prevents birdhouses from water leaking
  • drainage holes in the bottom in the case of water leaking from entry hole (during heavy rains)
  • thick walls offer full protection against Middle-European climate (hot summers, freezing winters)
  • ventilation holes - fresh air circulation
  • a construction without unnecessary perches that only provide an easier access for martens and cats
  • the inside of the front wall is not planed which enables the offspring to clamber up
  • vertical front side opens easily to ensure easier maintenance
  • several possibilities of mounting and attachment (galvanized chain, UV-resistant polypropylene string - load capacity up to 250 kg, galvanized steel band, wooden lath)
Data sheet
Materials PEFC certified wood
Construction hoblovaná dřevěná prkna o tl. 20 mm, 15x vrut se zápustnou hlavou , 4x vrut s půlkulatou hlavou, 2 hřebíky pozinkované s podložkou, pozinkovaný obrtlík, nerezový krycí plech vletového otvoru, 1x šroubovákový bit TORX T20, 1x šroubovákový bit PZ1
Entry hole 29x42 mm
Finish treated with natural linseed oil
Dimensions (widthxdepthxheigt) 550x210x70 mm
Weight 3,0


Customers who bought this product also bought:

15 other products in the same category:

Související výrobky